How are our belts constructed:

All of our belts are constructed exactly the same way with the exception of the Paul's belt. (it is a single layered belt made out of 9/10 oz of Bull Hide). Each belt is hand crafted from 2 layers of  6/7 oz  Bull Hide or Horse Hide from the finest tanneries available. (the thickness will be a tad shy of .25”)  Horse Hide is a more dense leather than Bull Hide which makes it more resistant to abrasion and moisture and will be a little stiffer than Bull Hide. We only use Premium Grade A hides from the finest tanneries. The straps are then dipped in dye so they absorb the intended color at a more even rate. Then glued and sewn with “black” or “white” heavy duty nylon thread. Each belt then goes through a 21 step process of edging, dying, burnishing, sealing, sanding and then to the final coat. All this is done by hand to achieve a truly hand crafted product.  Our belts will last for years and function as they were intended.

Belts dyed and ready to start assembly

Between each step the belt is wiped down with lambs wool and inspected for any imperfections.

We do not dye the liner to prevent dye transfer onto clothing.  A good sealer and a top coat and the liner is good to go.

We use only the finest leather products available on the market.

A good quality double layer of 6/7 oz  Bull Hide or Horse Hide will support a 36 oz firearm and accessories all day long without sagging. I know - I carry one each and every day and have done so for years.  Our belts will not stretch over time and will conform to your body for a comfortable fit.

Belts dyed, edges finished and almost ready for the buckles